360 Vision Technology Vision RF Dome Camera

Key Features

True RF Integration
Wireless Transmission
Transmission Quality
Frequency Range
Multi-change video
Pre-fitted antennae
OFCOM compliance
Receiving equipment
Multi-protocols integration
OSD
Field Support
Intelligent Alarms
Remote Maintenance
Privacy Zones
Mount Options

Radio Rapid Dome Camera

Specification

True RF Integration	The VisionRFDome is provided as a fully integrated unit – all the RF technology is within the dome housing reducing installation time.
Wireless Transmission	The very latest in video and data transmission technology is used to achieve ‘point to point’ or ‘point to multipoint’ wire-free transmission of video and telemetry signals.
Frequency Range	The VisionRFDome operates at 5.8 Ghz for video transmission and 868 Mhz for telemetry transmission, avoiding the congested 1.4 to 2.4 GHz frequency range often used.
Multichannel video	The VisionRFDome has dip switch selectable channel identification, enabling multiple VisionRFDomes to operate independently in one network.
Pre-fitted Antennae	The VisionRFDome comes pre-fitted with 3dB, 5.8 Ghz and 2dB, 868Mhz Antennae for fast installation requiring no specialist set up.
OFCOM compliance	The 5.8 Ghz frequency range for 25mW video transmission is licence exempt in the UK.
Receiving Equipment	The receiving equipment can be supplied as a 1 to 4 channel video and telemetry, including either omnidirectional or directional antennae.
Multi Protocols Integration	The VisionRFDome range integrates fully with all leading DVR, Matrix and IP Transmission products simplifying system specification and design.
OSD	The On Screen Display (OSD) function enables full access to all Dome functions using either third party or 360 Vision equipment.
Field Support	360 Vision staff offer full support in sales, technical support, installation and commissioning.
Intelligent Alarms	The intelligent alarm module allows up to 144 alarm inputs which can be remotely configured via the Vision matrix or any compatible third-party system.
Structured Cabling	The Vision Dome can have built-in structured cabling connections to save installation costs.
Remote Maintenance	Remote reset and configuration are facilitated on third-party equipment by the OSD function.
Creative Privacy Zones	32 privacy zones are available with simple joystick positioning and sizing.
Mount Options	Wall and Swan neck mounting options are available.

External Vision Dome Camera Features

External Vision Dome Camera Features	18xColour External	18xCol/Mono External	26xCol/Mono External	36xCol/Mono External
Colour (C) Col/mono (C/M)	C	C/M	C/M	C/M
Imager	1/4” Ex-View HAD	1/4” Ex-View HAD	1/4” Ex-View HAD	1/4” Ex-View HAD
Zoom – optical + digital	18x, 12x	18x, 12x	26x, 12x	36x, 12x
Zoom Total	216x	216x	312x	432x
Line Resolution	460	460	460	460
Pixels	752(H) x 582(H)	752(H) x 582(H)	752(H) x 582(H)	752(H) x 582(H)
Horizontal view angle	2.8°(T) 48°(W)	2.8°(T) 48°(W)	2.2°(T) 54°(W)	2.7°(T) 57.8°(W)
Lens size	4.1 – 73.8 mm	4.1 – 73.8 mm	3.5 – 91.0 mm	3.4 – 122.40 mm
ExView technology	Y	Y	Y	Y
Min sensitivity – colour	0.7 Lux	0.7 Lux	1 Lux (50 IRE)	1.4 Lux (50 IRE)
Min sensitivity – colour int	0.05 Lux	0.05 Lux	0.07 Lux	0.01 Lux
Min sensitivity – mono int	N/A	0.01 Lux	0.01 Lux	0.01 Lux
Signal/noise ratio	>50 dB	>50 dB	>50 dB	>50 dB
Picture freeze	Y	Y	Y	Y

Dome Features

Video Output1 V p to p, 75W

Scanning		PAL
Focus/iris		Auto / manual
Presets		360
Tours		4 (max 128 presets per tour)
Learned patrols		4 mimic tours – up to 30 minutes duration each
Remote Reset		Via OSD, IP network or dial-up
Dynamic privacy zones		Up to 32, 8 present on screen simultaneously, 4 levels of opacity
Preset titling		Y
Telemetry		RS485
Variable pan speed/coverage		0.1 – 400°/sec, 360° continuous rotation, absolute positioning
Variable tilt speed		0.1 – 200°/sec, absolute positioning
Tilt coverage		90°
Auto homing		Goes to preset, tour or mimic tour after a prescribed time
Col/mon changeover		3 levels – menu set up
Line Lock		Y enable/disable
Operating temperature		-20 to 50°C
Power		24Vac
Recommended PSU incl		VDE-PSU [1xT2.5A fuse] VDE-MALARM-EU [1xT2.5A+1x200mA
Mounting options		Wall, Wall-Corner, Swan Neck and Pendant
Operational enhancements		Telemetry and power with optoisolation
Certification		Safety mark: CE approval: Ingrss, IP65
RF Receivers		Receiver Features
Video Input		Composite PAL 1V p to p, 75W
Video Bandwidth		30Hz to 5Mhz
Transmission freq range video		5.725 to 5.875 GHz, 16 channel, 25mW
Transmission freq range		868.00 to 868.30 Mhz, 8 channel, 25mW
Video Antenna		18dB, 5.8 GHz
Telemetry Antenna		4dB, 868 Mhz
Protection Class		IP65
Power Supply DC		12 to 15vDC
Enclosure size mm (4 ch)		400 x 300 x 180 mm
Transmission Distance		Up to 3000m (line of sight)

Advanced Features:

Video, alarm and telemetry (VAT) plug and play

360 Vision has introduced the VAT plug and play installation units to compliment the VisionRFDome range. VAT plug and play have bee designed to streamline the installation of microwave video transmission and digital telemetry systems. They consist of 1-4 channel video receivers and single channel telemetry data transceivers for PTZ control. They are housed in IP65 external enclosures ready for installation and come complete with all antennas and mounting brackets.

On-screen Display (OSD)

OSD enables 360 Vision and any third party matrix, transmission or DVR products to remotely access the functionality and set up a configuration of the VisionRFDome. OSD means dome functionality is not compromised depending on the control equipment used (like most open protocol solutions) making the VisionRFDome ideal for use in new and retrofit installations. Remote set up features include ”reset”, ”gain and lift” and all other video adjustments. First level maintenance can, therefore, be achieved remotely, without the need for expensive site visits.

Quietness and accuracy

400,000 position stepper motors make the VisionIPDome’s operation extremely quiet as well as giving it as a highly accurate return to preset positions.

Browse: