The IK-WR01A combines a rugged vandal-resistant design with hybrid network/analogue capabilities to meet the needs of schools, prisons, stadiums, outdoor public places and other areas subject to vandalism
Pick-up element | I/3” Interline Transfer CCD | ||||
Effective picture elements | 771(H) x492(V) (380K) | ||||
Resolution | 480 TVL Horizontal (NTSC out) | ||||
Minimum subject illumination | 0.2 lux @ F=1.0 | ||||
Lens | Vari-Focal f=3.0-8.0 mm, F=1.0, CS Mount | ||||
Iris control | Auto Iris Lens (DC) | ||||
White balance | 2500-10,000 K | ||||
Backlighting compensation | Center-Bottom (DIP-SW) | ||||
S/N ratio | 50 dB | ||||
Maximum image size | VGA, QVGA, QQVGA | ||||
Frame rate | 640 x 480 = 22 frames per second 320 x 240 = 30 frames per second 160 x 120 = 30 frames per second | ||||
Image compression method | M-JPEG | ||||
Protocols | TCP/IP, UDP/IP, FTPc, FTPs, DHCPc, HTTP, DNS, DDNS, ARP, IMCP, SMTP, POP3, RNCP | ||||
Ethernet port | RJ45 | ||||
Ethernet connection | 10/100BASE-TX | ||||
Video output | VBS (1.0 Vp-p, 75ohm unbalance, BNC) | ||||
Video format | NTSC, 2:1 Interlace | ||||
Sync system | Line-Lock/Internal (DIP SW) | ||||
Shutter control | AES (1/60 to 1/100,000 sec.) | ||||
Waterproof | IP66 | ||||
Operating temperature | 14°F to 122°F (-10°C to 50°C) | ||||
Camera mounting methods | Flush, Ceiling, Flush Mounting Base is Included | ||||
Power supply | AC 24 V 60Hz, DC 12 V, PoE | ||||
Power consumption | 4 W | ||||
Dimensions (inches) | Camera: 6.7 (W) x 5.8 (H), w/Bracket: 6.9 (W) x 6.1 (H) | ||||
Weight | Camera: 2.9 lbs Mounting Base: 1.3 lb | ||||
Auto-Iris lens support | DC/Video, 4 Pin Connector | ||||
Standards | UL2044/cUL, FCC, Class A | ||||
Accessories | Mounting Base, Screws, Clear Dome Cover, Special Hex Wrench, Manual, RJ45 In-line, Coupler Monitor Out Harness Wire, Power Connector, CD-ROM |